Địa điểm mua hàng
STBACI1230K – standard analog input kit STB – 0..20 mA – 2 I – 12 bits | Schneider Electric Global
Giá: Liên Hệ
Adaptable to network
notification_ok
Simple, open and flexible
notification_ok
Save time, money by simplifying maintenance, diagnostic task
notification_ok
Short circuit protection
notification_ok
IP20 degree of protection
notification_ok
Environmental performance of the product Learn more
Tùy chọn giao dịch
Tùy chọn thanh toán
Description
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC). It has 2 analogue inputs (current 0mA to 20mA) with 12bit resolution. This product is compatible with most major fieldbus networks. It is an analogue input kit with a rated supply voltage of 24V DC and a current consumption of 30mA at 5V DC for logic bus. The response time is 5ms. It supports hot swap fallback, requires standard type network interface module (NIM). It is an IP20 rated product. Its dimensions are 128.3mm (width) x 70mm (depth) x 13.9mm (height) and weighs 0.116kg. It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines applications. This product is certified by FM Class 1 Division 2, ATEX category 3G, CE, UL, CSA and C-Tick. This kit is suitable for use with mounting base STBXBA1000 and power distribution module STBPDT3100/3105. The kit includes STBACI1230 module, STBXBA1000 base, STBXTS2100, 6-terminal spring clamp connector and STBXTS1100, 6-terminal screw type connector. The Modicon STB distributed I/O solution is an open, modular input/output system that makes it possible to design automation islands managed by a master controller via a bus or communication network
Specifications
| Range of product | Modicon STB distributed I/O solution |
|---|---|
| Product or component type | Standard analog input kit |
| kit composition | STBACI1230 module STBXBA1000 base STBXTS2100, 6-terminal spring clamp connector STBXTS1100, 6-terminal screw type connector |
| Analogue input type | Current 0…20 mA |
| Analogue input number | 2 |
| analogue input resolution | 12 bits |
| Type of filter | Single low pass input filter 25 Hz |
| Absolute maximum input | 25 mA/50 V DC |
|---|---|
| Response time | 5 ms |
| Cold swapping | Yes |
| Hot swapping fallback | Yes for standard NIMs |
| Fallback status | State 0 basic NIMs User configurable standard NIMs |
| Data format | EN 61131-2 IEC 61131-2 |
| Update time | 10 ms |
| Integral linearity | +/- 0.1 %FS |
| Differential linearity | Monotonic |
| Input impedance | <= 300 Ohm |
| Maximum supply current for sensors | 100 mA per input channels |
| Protection type | Short-circuit protection |
| Absolute accuracy error | +/- 0.5 % of full scale 25 °C |
| Temperature drift | +/-0.01 %/°C |
| Insulation between channels and logic bus | 1500 V for 1 minute |
| Insulation between channels and sensor bus | 30 V |
| Addressing requirement | 4 input words |
| Product compatibility | Power distribution module STBPDT3100/3105 Mounting base STBXBA1000 |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Current consumption | 30 mA at 5 V DC for logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (green) module status (RDY) 1 LED (red) module error (ERR) |
| depth | 70 mm |
| Height | 13.9 mm |
| Width | 128.3 mm |
| Net weight | 0.116 kg |
| product certifications | C-Tick UL CSA FM Class 1 Division 2 ATEX Cat 3G |
|---|---|
| Pollution degree | 2 conforming to IEC 60664-1 |
| Operating altitude | <= 2000 m |
| IP degree of protection | IP20 conforming to EN 61131-2 class 1 |
| Ambient air temperature for operation | -25…70 °C |
| Ambient air temperature for operation | 32…140 °F without derating |
| Ambient air temperature for storage | -40…85 °C without derating |
| Ambient air temperature for storage | -40…185 °F without derating |
| Relative humidity | 95 % at 60 °C without condensation |
| Vibration resistance | +/-0.35 mm at 10…58 Hz 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail |
| Shock resistance | 30 gn for 11 ms conforming to IEC 88 reference 2-27 |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.54 cm |
| Package 1 Width | 8.38 cm |
| Package 1 Length | 13.46 cm |
| Package 1 Weight | 140 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 28 |
| Package 2 Height | 15 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 4.43 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 448 |
| Package 3 Height | 75.0 cm |
| Package 3 Width | 60.0 cm |
| Package 3 Length | 80.0 cm |
| Package 3 Weight | 79 kg |
| Warranty | 18 months |
|---|
Dimensions Drawings
Dimensions
Wiring Diagrams
Examples
2 isolated analog sensors, external 24 VDC power supply
2 non-isolated analog sensors, 24 VDC supplied by the PDM
|
Pin |
Top Connections |
Bottom Connections |
|---|---|---|
|
1 |
+24 VDC from field power bus for field device accessories |
+24 VDC from field power bus for field device accessories |
|
2 |
input from sensor 1 |
input from sensor 2 |
|
3 |
no connection |
no connection |
|
4 |
analog input return |
analog input return |
|
5 |
no connection |
no connection |
|
6 |
field power return (to the module) |
field power return (to the module) |
Sản phẩm tương tự
Giá: Liên Hệ
