Địa điểm mua hàng
ABE7H16R21 – passive connection sub-base ABE7 – 16 inputs or outputs – Led | Schneider Electric Global
Giá: Liên Hệ
Universal sub base to connect I/O and all the commons
Plug-and-play solution
LED state display
Common polarities distribution
Wide range of operating temperature from -5°C to 60°C
Environmental performance of the product Learn more
Tùy chọn giao dịch
Tùy chọn thanh toán
Description
This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. This passive connection sub-base provides 16 modularity input/output channels. It has 2 terminals per channel. It is a sub base with a maximum supply current of 1.8A and a rated supply voltage of 19V to 30V. It is furnished with screw clamp terminals for electrical connection. It is an IP2x rated product. Its dimension is 125mm (Width). It weighs 0.3kg. It is suitable for all types of industrial applications. This product is certified by GL, BV, CSA, UL, DNV and LROS. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
Specifications
| Range of product | Modicon ABE7 |
|---|---|
| Product or component type | Passive discrete I/O sub-base |
| Sub-base type | I/O sub-base |
| [Us] rated supply voltage | 19…30 V conforming to IEC 61131-2 |
| Number of channels | 16 |
| Number of terminal per channel | 2 |
| Connections – terminals | Screw type terminals, 1 x 0.09…1 x 1.5 mm² (AWG 28…AWG 16) flexible with cable end Screw type terminals, 1 x 0.14…1 x 2.5 mm² (AWG 26…AWG 12) solid Screw type terminals, 1 x 0.14…1 x 2.5 mm² (AWG 26…AWG 14) flexible without cable end Screw type terminals, 2 x 0.09…2 x 0.75 mm² (AWG 28…AWG 20) flexible with cable end Screw type terminals, 2 x 0.2…2 x 2.5 mm² (AWG 24…AWG 14) solid |
| supply voltage type | DC |
|---|---|
| Number of horizontal rows | 2 |
| Status LED | 1 LED per channel (green) channel status 1 LED (green) power ON |
| Polarity distribution | 0 V or 24 V |
| Short-circuit protection | 2 A internal fuse, 5 x 20 mm, fast blow (PLC end) |
| connector type | HE-10 |
| Pin number | 20 pins |
| Fixing mode | By clips (35 mm symmetrical DIN rail) By screws (solid plate with fixing kit) |
| maximum supply current | 1.8 A |
| Current per channel | 0.5 A |
| Maximum current per output common | 1.8 A |
| Voltage drop on power supply fuse | 0.3 V |
| [Ui] rated insulation voltage | 2000 V |
| Installation category | II conforming to IEC 60664-1 |
| Tightening torque | 0.6 N.m with flat Ø 3.5 mm screwdriver |
| Width | 125 mm |
| Net weight | 0.3 kg |
| product certifications | DNV CSA UL GL EAC |
|---|---|
| IP degree of protection | IP2X conforming to IEC 60529 |
| Resistance to incandescent wire | 750 °C conforming to IEC 60695-2-11 |
| Shock resistance | 15 gn for 11 ms conforming to IEC 60068-2-27 |
| Vibration resistance | 2 gn (f= 10…150 Hz) conforming to IEC 60068-2-6 |
| Resistance to electrostatic discharge | 4 kV (contact) level 3 conforming to IEC 61000-4-2 8 kV (air) level 3 conforming to IEC 61000-4-2 |
| Resistance to radiated fields | 10 V/m (26000000…1000000000 Hz) conforming to IEC 61000-4-3 level 3 |
| Resistance to fast transients | 2 kV level 3 conforming to IEC 61000-4-4 |
| Ambient air temperature for operation | -5…60 °C conforming to IEC 61131-2 |
| Ambient air temperature for storage | -40…80 °C conforming to IEC 61131-2 |
| Pollution degree | 2 conforming to IEC 60664-1 |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 7.000 cm |
| Package 1 Width | 8.200 cm |
| Package 1 Length | 13.700 cm |
| Package 1 Weight | 302.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 30 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 9.455 kg |
| Warranty | 18 months |
|---|
Dimensions Drawings
Dimensions
(1)
ABE7BV20 / ABE7BV20E
Mounting and Clearance
Mounting
Connections and Schema
HE10 16 Channels
Wiring Diagrams
(1)
Inductive load
Performance Curves
Curves for Determining Cable Type and Length According to the Current
16-channel Sub-base
L
Cable length
IT
Total current per sub base (A)
IA
Average current per channel (mA)
(1)
TSXCDP••2 and ABFH20H••0 cables with c.s.a. 0.08 mm2 (AWG 28).
(2)
TSXCDP••3 cables with c.s.a. 0.34 mm2 (AWG 22).
(3)
Cables with c.s.a. 0.13 mm2 (AWG 26).
The curves are given for a voltage drop of 1 V in the cable. For n volts tolerance, multiply the length determined from the graph by n.
Sản phẩm tương tự
Giá: Liên Hệ
Giá: Liên Hệ
