Địa điểm mua hàng
STBDDO3410K – standard digital output kit – Modicon STB – 24 V DC – 4 O | Schneider Electric Global
Giá: Liên Hệ
Easy to connect
4 outputs
Power supply 24 V DC
Environmental performance of the product Learn more
Tùy chọn giao dịch
Tùy chọn thanh toán
Description
This output kit is part of the Modicon STB range, an offer of modular distributed I/O. This standard digital output kit is an accessory kit for Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC). It includes a digital input module, an STB base, one spring clamp connector, and one screw type connector. Setting can be done via Advantys STB configuration software. It weighs 0.11kg. The kit includes STBXBA1000 base, STBDDO3410 module, STBXTS1100 6-terminal screw type connector, and STBXTS2100 6-terminal spring clamp connector. The Modicon STB distributed I/O solution is an open, modular input/output system that makes it possible to design automation islands managed by a primary controller via a bus or communication network.
Specifications
| Range of product | Modicon STB distributed I/O solution |
|---|---|
| Product or component type | Standard digital output kit |
| kit composition | STBXTS1100, 6-terminal screw type connector STBXTS2100, 6-terminal spring clamp connector STBXBA1000 base STBDDO3410 module |
| Discrete output number | 4 |
| discrete output type | Solid state |
| discrete output voltage | 24 V |
| discrete output voltage type | DC |
| Discrete output current | 500 mA |
|---|---|
| discrete output logic | Positive or negative |
| Output voltage | 19.2…30 V DC |
| Absolute maximum voltage | 56 V 1.3 ms |
| Response time | 560 µs off-to-on 870 µs on-to-off |
| Cold swapping | Yes |
| hot swapping | Yes for standard NIMs |
| fallback | State 0 basic NIMs User configurable standard NIMs |
| Protection type | Power protection integrated fuse on PDM time lag 10 A Reverse polarity protection Short-circuit protection Thermal overload protection |
| Insulation between channels and logic bus | 1500 V for 1 minute |
| Maximum leakage current | 0.4 mA at state 0 30 V |
| Surge current | 5 A 0.5 ms |
| Maximum load capacitance | 50 µF |
| Maximum load inductance | 500 mH at 4 Hz |
| Minimum load | 0.5 mA |
| Reset | Manual reset COM fault |
| Product compatibility | Power distribution module STBPDT3100/3105 I/O base STBXBA1000 |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Current consumption | 70 mA at 5 V DC for logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (green) module status (RDY) 1 LED per channel (green) channel status (OUT1 to OUT4) 1 LED (red) module error (ERR) |
| Height | 13.9 mm |
| depth | 70 mm |
| Width | 128.3 mm |
| Net weight | 0.11 kg |
| Standards | EN/IEC 61131-2 |
|---|---|
| product certifications | FM Class 1 Division 2 CSA UL |
| Pollution degree | 2 conforming to IEC 60664-1 |
| Operating altitude | <= 2000 m |
| IP degree of protection | IP20 conforming to EN 61131-2 class 1 |
| Ambient air temperature for operation | 0…60 °C (without derating) |
| Ambient air temperature for operation | 32…140 °F without derating |
| Ambient air temperature for storage | -40…85 °C without derating |
| Ambient air temperature for storage | -40…185 °F without derating |
| Relative humidity | 95 % at 60 °C without condensation |
| Vibration resistance | 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail +/-0.35 mm at 10…58 Hz |
| Shock resistance | 30 gn for 11 ms conforming to IEC 88 reference 2-27 |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.7 cm |
| Package 1 Width | 8.0 cm |
| Package 1 Length | 13.0 cm |
| Package 1 Weight | 133.0 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 28 |
| Package 2 Height | 15.0 cm |
| Package 2 Width | 30.0 cm |
| Package 2 Length | 40.0 cm |
| Package 2 Weight | 4.15 kg |
| Unit Type of Package 3 | PAL |
| Number of Units in Package 3 | 448 |
| Package 3 Height | 60.0 cm |
| Package 3 Width | 80.0 cm |
| Package 3 Length | 448.0 cm |
| Package 3 Weight | 59.584 kg |
| Warranty | 18 months |
|---|
Dimensions Drawings
Dimensions
Connections and Schema
Wiring Diagram
Example
4 two-wire actuators
|
Pin |
Top Connector |
Bottom Connector |
|---|---|---|
|
1 |
output to actuator 1 |
output to actuator 3 |
|
2 |
field power return |
field power return |
|
3 |
field power return |
field power return |
|
4 |
output to actuator 2 |
output to actuator 4 |
|
5 |
field power return |
field power return |
|
6 |
field power return |
field power return |
Sản phẩm tương tự
Giá: Liên Hệ
